OSPFv3 Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1658
show ospfv3 neighbor
show ospfv3 {domain <domainName>} neighbor {routerid <ip-address>} {vlan
<vlan-name> | tunnel <tunnel-name>} {detail}
Description
Displays information about an OSPFv3 neighbor.
Syntax Description
Default
If no argument is specified, all OSPFv3 neighbors are displayed.
Usage Guidelines
None.
Example
The following command displays information about the OSPFv3 neighbors on the VLAN
accounting
:
show ospfv3 neighbor vlan accounting
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
domainName
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
ip-address
Specifies a neighbor router ID.
vlan-name
Specifies an IPv6 configured VLAN.
tunnel-name
Specifies an IPv6 tunnel.
detail
Specifies detail information.
