Power Over Ethernet Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
554
unconfigure inline-power usage-threshold
unconfigure inline-power usage-threshold
Description
Unconfigures the inline power usage alarm threshold and returns threshold to the default value of 70%.
Syntax Description
This command has no arguments or variables.
Default
70.
Usage Guidelines
This command unconfigures the PoE usage threshold setting for initiating SNMP event and EMS
messages and returns the switch’s inline power usage threshold for to 70%. The system initiates an
event and message once that percentage of the budgeted power is being used.
On stand-alone switches, this PoE threshold applies to the
entire
switch. On modular switches, the
threshold applies only to the percentage
per
slot
of measured to budgeted power use; the threshold does
not
apply to the entire switch.
The system generates an additional SNMP event and EMS message once the power usage falls
below
the
threshold again; once the condition clears.
Example
The following command resets the inline power usage alarm threshold to 70%:
unconfigure inline-power usage-threshold
History
This command was first available in ExtremeWare XOS 11.1
Platform Availability
This command is available on the G48P and G48Pe modules installed in the BlackDiamond 8800 series
switch and the Summit X450e-24p switch.
