disable dot1p examination inner-tag ports
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
767
disable dot1p examination inner-tag ports
disable dot1p examination inner-tag ports [all | <port_list>]
Description
Used with vMANs, and instructs the switch to examine the 802.1p value of the outer tag, or added
vMAN header, to determine the correct egress queue on the egress port.
Syntax Description
Default
Disabled.
Usage Guidelines
Use this command to instruct the system to refer to the 802.1p value contained in the outer tag, or
vMAN encapsulation tag, when assigning the packet to an egress queue at the egress port of the
vMAN.
NOTE
See
Chapter 15, “QoS Commands,”
for information on configuring and displaying the current 802.1p and DiffServ
configuration for the inner, or original header, 802.1p value.
Example
The following command uses the 802.1p value on the outer tag, or vMAN encapsulation, to put the
packet in the egress queue on the vMAN egress port:
disable dot1p examination inner-tag port 3:2
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available only on the BlackDiamond 8800 series switch (formerly known as Aspen)
and the Summit X450 family of switches.
all
Specifies all ports.
port_list
Specifies a list of ports or slots and ports.
