Power Over Ethernet Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
514
configure inline-power label ports
configure inline-power label <string> ports <port_list>
Description
Lets you create your own label for a specified PoE port or group of PoE ports.
Syntax Description
Default
No label.
Usage Guidelines
Use the
show inline-power configuration ports
command, as shown in the following example, to
display inline power configuration information, including the label (if any) for each port:
show inline-power configuration port 3:1-10
Following is sample output from this command:
Port Config Operator Limit Priority Label
3:1 Enabled 16000 mW Low finance
3:2 Enabled 15000 mW Low finance
3:3 Enabled 15000 mW Low
3:4 Enabled 15000 mW Low
3:5 Enabled 15000 mW Low
3:6 Enabled 15000 mW Low marketing
3:7 Enabled 15000 mW Low marketing
3:8 Enabled 15000 mW Low marketing
3:9 Enabled 15000 mW Low
3:10 Enabled 15000 mW Low
Example
The following command assigns the name “alpha-test_1” to port 1 on slot 4:
config inline-power label alpha-test_1 ports 4:1
History
This command was first available in ExtremeWare XOS 11.1.
string
Specifies a name up to 15 characters in length to identify the specified power
port(s).
port_list
Specifies one or more ports or slots and ports.
