unconfigure vman ratelimit flood-traffic designated-port
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
945
unconfigure vman ratelimit flood-traffic designated-port
unconfigure vman <vman_name> ratelimit flood-traffic designated-port
Description
Removes the control on flooding, multicast, and broadcast traffic in a vMAN with egress rate-limiting
applied.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to remove the control on flooding, multicast, and broadcast traffic in the vMAN with
egress rate limiting.
To display the port you designated to use the rate-limit profile that controls the flooding traffic for the
vMAN with egress rate limiting enabled, issue the
show vman detail
command.
The following is sample output from this command (information is displayed on the ERL Designated
Port line):
VMAN Interface with name vman400 created by user
Admin State: Enabled Tagging: 802.1Q Tag 400
Priority: 802.1P Priority 0
Virtual router: VR-Default
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
ERL Designated Port: Not configured
QosProfile: QP1
Ports: 0. (Number of active ports=0)
Example
The following command removes the control of flooding, multicast, and broadcast traffic in the egress
rate-limit enabled vMAN metro:
unconfigure vman metro ratelimit flood-traffic designated-port
vman_name
Specifies the egress rate-limited enabled vMAN for which you are removing the
control on flooding, multicast, and broadcast traffic.
