show lacp member-port
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
383
●
Actor Flag
■
A—Activity
■
T—Timeout
■
G—Aggregation
■
S—Synchronization
■
C—Collecting
■
D—Distributing
■
F—Defaulted
■
E—Expired
●
Partner Port
■
The operational value of the port number assigned to this link by partner.
●
Up or Down—LACP protocol running or not on specified port
●
Enabled or disabled (not configurable)
●
Link State—Link state on this port up or down
●
Actor Churn—True or false
●
Partner Churn—True or false
●
Ready_N—Ready to be added to aggregator.
●
Wait pending
●
Ack pending
●
LAG Id
■
S—Displays information on controlling partner of LAG.
■
T—Displays information on controlled partner of LAG.
●
Stats
■
Rx - Accepted
■
Rx - Dropped due to error in verifying PDU
■
Rx - Dropped due to LACP not being up on this port
■
Rx - Dropped due to matching own MAC
■
Tx - Sent Successfully
■
Tx - Transmit error
Example
The following command displays LACP information on the specified port:
show lacp member-port 4:9
The following is sample output from this command on a modular switch:
Member Port Rx Sel Mux Actor Partner
Port Priority State Logic State Flags Port
--------------------------------------------------------------------------------
4:9 300 Current Selected Collect-Dist A-GSCD-- 4009
================================================================================
Actor Flags: A-Activity, T-Timeout, G-Aggregation, S-Synchronization
C-Collecting, D-Distributing, F-Defaulted, E-Expired
