show fdb
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
803
Example
The following command displays information about all the entries in the FDB:
show fdb
It produces output similar to the following:
Mac Vlan Age Use Flags Port List
------------------------------------------------------------------------------------
00:a0:23:12:34:56 peggy(4094)
0000 0000
spm 5:11
Flags : d - Dynamic, s - Static, p - Permanent, n - NetLogin, m - MAC, i - IP,
x - IPX, l - lockdown MAC, M - Mirror, B - Egress Blackhole,
b - Ingress Blackhole, v - MAC-based VLAN
Total: 1 Static: 1 Perm: 1 Dyn: 0 Dropped: 0
FDB Aging time: 300
History
This command was first available in ExtremeWare XOS 10.1.
The
stats
and
netlogin
parameters were first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
Flags
Flags that define the type of entry:
• B - Egress Blackhole
• b - Ingress Blackhole
• d - Dynamic
• s - Static
• p - Permanent
• m - MAC
• n - NetLogin
• l - lockdown MAC
• M - Mirror
• i - an entry also exists in the IP FDB
• x - an entry also exists in the IPX FDBs
• v - NetLogin MAC-Based VLAN (only supported on the Summit X450 switch
and the BlackDiamond 8800 family of switches)
Port List
The ports on which the MAC address has been learned.
