Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
182
enable snmp traps
enable snmp traps
Description
Turns on SNMP trap support.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
An authorized trap receiver can be one or more network management stations on your network. The
switch sends SNMP traps to all trap receivers.
To view if SNMP traps are being sent from the switch, use the
show management
command. The
show
management
command displays information about the switch including the enabled/disabled state of
SNMP traps being sent.
Example
The following command enables SNMP trap support on the switch:
enable snmp traps
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
