show vrrp vlan
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1319
show vrrp vlan
show vrrp vlan <vlan_name> {stats}
Description
Displays VRRP information for a particular VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
Depending on the software version running on your switch or your switch model, additional or
different VRRP information might be displayed.
If you specify the command without the
stats
keyword, the following VRRP information appears:
●
VLAN—The name of the VRRP VLAN.
●
VRID—The VRRP Virtual Router Identification number for the VRRP VLAN.
●
VRRP—The enabled/disabled state of VRRP on the VLAN.
●
State—The current state of the VRRP router. The state includes the following:
■
Init—The VRRP router is in the initial state.
■
Backup—The VRRP router is a backup router.
■
Master—The VRRP router is the master router.
●
Priority—The priority value of the VRRP VLAN.
●
Advertisement Interval—Indicates the configured advertisement interval.
●
Preempt—Indicates that the VRRP VLAN is configured for preempt mode, which controls whether a
higher priority backup router preempts a lower priority master.
●
Authentication—If configured, identifies the VRRP simple password.
●
Virtual IP Addresses—If configured, the virtual IP address associated with the VRRP VLAN.
●
Tracked Pings—If configured, displays the:
■
Target IP address you are pinging.
■
Number of seconds between pings to the target IP address.
■
Number of misses allowed before this entry is considered to be failing.
●
Tracked IP Routes—If configured, displays the IP address and subnet mask of the tracked route(s).
●
Tracked VLANs—If configured, displays the name of the tracked VLAN(s).
vlan_name
Specifies the name of a VRRP VLAN.
stats
Specifies statistics for a particular VLAN.
