QoS Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
938
show traffic queue utilization
show traffic queue [port <port_list> | <queue_name>] utilization
Description
Displays percentage of configured HQoS aggregated traffic each priority level—high, medium, or low—
of the specified traffic queue (or port) is using. This value is a percentage of the traffic queue’s
configured peak rate in each of the priority levels.
Syntax Description
Default
N/A.
Usage Guidelines
Allows you to view the percentage of the configured HQoS aggregated peak rate traffic in each part of
the strict priority queues: high, medium, or low. The utilization percentage is averaged over a 5-second
interval.
If you issue the command,
configure ports rate-limit packet byte-adjustment
, the system
calculates uses that byte size to calculate the utilization values.
Displays the following information:
●
Name of traffic queue
●
Direction of queue
●
Priority (high, medium, low)
●
Percentage of configured peak rate in each of the priority levels
You can also display this information by port.
Example
The following command displays HQoS utilization for the specified port:
show traffic queue port 2:1 utilization
port_list
Enter the ports for which you want to display how much each level is using.
queue_name
Enter the name of the traffic queue for which you want to display how much
each level is using.
