Commands for Virtual Routers
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
814
virtual-router
virtual-router {<vr-name>}
Description
Changes the virtual router domain context.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to change the virtual router context for subsequent commands. When you issue the
command, the prompt changes to reflect the virtual router domain. Configuration commands for layer 3
routing protocols, creating VLANs, and deleting VLANs apply only to the current virtual router
domain.
Under a virtual router configuration domain, any virtual router commands are applied only to that
virtual router. The virtual router commands consist of all the BGP, OSPF, PIM and RIP commands, and
the commands listed in
Table 21
.
Table 21: Virtual router commands
vr-name
Specifies the name of the virtual router.
[enable | disable] ipforwarding
clear iparp *
clear counters iparp *
configure iparp *
configure iparp [add | delete] *
[enable | disable] iparp *
show iparp *
configure iproute [add | delete] *
show iproute *
show ipstats *
rtlookup
create [vlan | vman] <vlan-name>
[enable | disable] igmp
[enable | disable] igmp snooping *
[enable | disable] ipmcforwarding
show igmp
