show ports information
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
397
Software redundant port: Disabled
Preferred medium:
Fiber
NOTE
On the GM-20XT and GM-20XTR modules for the BlackDiamond 12804 and 12804 R-Series switches, you can use
each port as either copper or fiber;
preferred medium
displays which medium the specified port is using.
History
This command was first available in ExtremeWare XOS 10.1.
Information on ingress rate shaping was added in ExtremeWare XOS 11.0.
NetLogIn, Smart Redundancy, and rate limiting were added in ExtremeWare XOS 11.1.
Information on unicast, multicast, and broadcast flooding; the
Port not present
parameter; and
autopolarity status were added in ExtremeWare XOS 11.2.
The
netlogin
parameters were added in ExtremeWare XOS 11.3.
The BlackDiamond 12804 R-Series-specific parameters were added in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.
