Commands for Configuring Slots and Ports on a Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
396
for more information on ingress queues, or bi-directional rate shaping.) The BlackDiamond 12804 switch does not
support ingress QoS settings.
BlackDiamond 12804 R-Series switch only.
The following command displays more specific information
for slot 2, port 1 on a BlackDiamond 12804 R-Series switch:
show ports 2:1 information detail
Following is sample output from this command:
Port: 2:1
Virtual-router: VR-Default
Type: NONE
Random Early drop: Unsupported
Admin state: Enabled with 10G full-duplex
Link State: Ready
Link Counter: Up 0 time(s)
VLAN cfg:
Name: Default, Internal Tag = 1, MAC-limit = No-limit, Virtual ro
uter: VR-Default
STP cfg:
s0(disable), Tag=(none), Mode=802.1D, State=FORWARDING
Protocol:
Name: Default Protocol: ANY Match all protocols.
Trunking: Load sharing is not enabled.
EDP: Enabled
ELSM: Disabled
Learning: Enabled
Unicast Flooding: Enabled
Multicast Flooding: Enabled
Broadcast Flooding: Enabled
Jumbo: Disabled
High Priority COS: 7
Packet Length Adjustment: 0 bytes
QoS Profile: None configured
Aggregate Queue:
QP0 MinBw = 0% MaxBw = 100% Pri = 8
Queue:
QP1 MinBw = 0% MaxBw = 100% Pri = 1
QP2 MinBw = 0% MaxBw = 100% Pri = 2
QP3 MinBw = 0% MaxBw = 100% Pri = 3
QP4 MinBw = 0% MaxBw = 100% Pri = 4
QP5 MinBw = 0% MaxBw = 100% Pri = 5
QP6 MinBw = 0% MaxBw = 100% Pri = 6
QP7 MinBw = 0% MaxBw = 100% Pri = 7
QP8 MinBw = 0% MaxBw = 100% Pri = 8
Ingress Rate Shaping : Unsupported
Ingress IPTOS Examination: Disabled
Egress IPTOS Replacement: Disabled
Egress 802.1p Replacement: Disabled
NetLogin: Disabled
NetLogin port mode: Port based VLANs
Smart redundancy: Enabled
