Commands for Status Monitoring and Statistics
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
656
configured on that slot. For example, if the frequency of sending backplane diagnostic packets is 7
seconds, the polling value is 7 seconds.
Displaying the System Health Check Setting.
To display the system health check polling setting on the
switch, use the following command:
show switch
As previously described, polling is always enabled on the switch, which is why you see the system
health check setting as Enabled. The following truncated output from a BlackDiamond 8810 switch
displays the system health check setting (displayed as
SysHealth check
):
SysName: TechPubs Lab
SysName: BD-8810Rack3
SysLocation:
SysContact: [email protected], +1 888 257 3000
System MAC: 00:04:96:1F:A2:60
SysHealth check: Enabled
Recovery Mode: None
System Watchdog: Enabled
Example
The following command enables backplane diagnostic packets on slot 6:
enable sys-health-check slot 6
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available only on modular switches.
