Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
190
show dhcp-client state
show dhcp-client state
Description
Displays the current DHCP/BOOTP client state for each vlan.
Syntax Description
This command has no arguments or variables.
Default
Displays the client state for all existing VLANs.
Usage Guidelines
None.
Example
The following command displays the DHCP/BOOTP status for all VLANs:
show dhcp-client state
Depending on your configurations, output from this command is similar to the following:
Client VLAN Protocol Server Current State
--------------- -------- --------------- ---------------------------------------
Default BOOTP 10.1.2.3
Received IP address configured on vlan
accounting
DHCP
10.2.3.4
DHCP state; Requesting
Mgmt None 0.0.0.0
A total of 3 vlan(s) where displayed
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
