show iproute ipv6
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1455
show iproute ipv6
show iproute ipv6 {priority | vlan <vlan_name> | tunnel <tunnel-name> |
<ipv6Netmask> | summary} {multicast | unicast} {vr <vrname>}}
Description
Displays the contents of the IPv6 routing table.
Syntax Description
Default
N/A.
Usage Guidelines
If a route is active and in use, it is preceded in the display by an “*”. If there are multiple routes to the
same destination network, the “*” will indicate which route is the most preferable route.
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command displays detailed information about all IPv6 routing:
show iproute ipv6
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
priority
Specifies to display route priority.
vlan_name
Specifies a VLAN name.
ipv6Netmask
Specifies an IPv6 address/prefix length.
summary
Specifies summary information
