Excalibur ISX 5312, Operation Manual

Page: 218 / 228

Excalibur ISX 5312/5314 T-1 Multiplexer Installation and Operation
C-2
FCC Part 68: Requirements For End Users
This equipment complies with Part 68 of the FCC regulations. On the back of the unit is an
equipment label that contains, among other information, the FCC registration number (AP3USA-
20191-DE-N) and Ringer Equivalence Number (REN), which is N.A. for this unit. If requested,
provide this information to your telephone company.
The REN is useful to determine the quantity of devices you may connect to your telephone line
and still have all of those devices ring when your number is called. In most but not all areas, the
sum of the RENs of all devices should not exceed five (5.0). To be certain of the number of
devices you may connect to your line, as determined by the REN, call your local telephone
company to determine the maximum REN for your calling area.
An FCC compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using a
compatible modular jack which is Part 68 compliant. See installation instructions for details.
The following are the associated private line port, jack, Facility Interface Code (FIC), and Service
Order Code (SOC) for this device:
Port Jack FIC SOC
T-1 SF RJ48C 04DU9-BN 6.0N
T-1 SF + B8ZS RJ48C 04DU9-DN 6.0N
T-1 ESF RJ48C 04DU9-1KN 6.0N
T-1 ESF + B8ZS RJ48C 04DU9-1SN 6.0N
Note that some types of analog private line connections may require the filing of a signal power
affidavit with the telephone company, and some types of digital installations may require the
filing of an "Encoded Analog Content and Billing Protection" affidavit.
This unit cannot be used on the public coin service provided by the telephone company.
Connection to Party Line Service is subject to state tariffs. (Contact the state public utility
commission or corporation for further information.)
If the unit causes harm to the telephone network, the telephone company may discontinue your
service temporarily. If possible, you will be notified in advance. But if advance notice is not
practical, you will be notified as soon as possible. You will be advised of your right to file a
complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the proper operation of your equipment. If they do, you will be given advance
notice so as to give you an opportunity to maintain uninterrupted service.
All repairs on your unit must be performed by the Milgo Solutions company that manufactured
the unit or by an authorized representative of that company. For service information contact the
appropriate Customer Support Office nearest you. Contact information is listed in the front of this
manual.