Excalibur ISX 5312, Operation Manual

Page: 159 / 228

Online Operation
5-19
5. Press the button beneath
State
. The bottom line of the screen indicates that the
DTE port is assigned 10 DS0 channels in multiples of 56 Kbps, which equals a
port rate of 560 Kbps. Possible displays are 01 through 24 DS0 channels
assigned in multiples of 56 or 64 Kbps. The screen also displays whether the
remote unit's T7 channel (
RemT7
) is enabled (
Y
) or disabled (
N
).
1 2 3 4
E scape Top
L I S X 5 3 1 4 D T E 1 S t a t u s
D a t a S i g n l S t a t e I n t r f
L D T E 1 S t a t e S t a t u s
1 0 x 5 6 K = 0 5 6 0 K R e m T 7 = N
<
>
Press the Escape button to return to the DTE Status submenu.
6. Press the button beneath
Intrf
. The screen displays the DTE port’s interface type,
which is always V.35. On central site models, this screen also displays the DTE
port pinout setting (ISX 5314 or ISX 5010). See “Setting DTE Port Interface” in
Chapter 2 for information about setting the DTE port pinout.
1 2 3 4
E scape Top L
I S X 5 3 1 4 D T E 1 S t a t u s
D a t a S i g n l S t a t e I n t r f
L D T E 1 I n t e r f a c e S t a t u s
I n t e r f a c e T y p e = V . 3 5
< >
Press the Escape button to return to the DTE Status submenu.
Step 7 applies only for DTE ports 2 or 4 on units equipped with one T-1 interface.