Estun pronet series, User Manual

Page: 121 / 193

ProNet Series AC Servo User's Manual
- 119 -
4.9.3 Torque Limiting Using an Analog Voltage Reference
Torque limiting by analog voltage reference limits torque by assigning a torque limit in an analog voltage to the T-REF
terminals (CN1-26,27). This function can be used only during speed or position control, not during torque control.
Refer to the following block diagram when the torque limit with an analog voltage reference is used for speed control.
Important ：
· There is no issue with input voltage polarity of the analog voltage reference for torque limiting.
· The absolute values of both + and – voltages are input, and a torque limit value corresponding to that absolute
value is applied in the forward or reverse direction.
Related Parameters
Parameter Meaning
Pn001 b.□1□□ Use the T-REF terminal to be used as an external torque limit input.