ProNet
Series
AC Servo User's Manual
- 21 -
Chapter 2
Installation
2.1 Servomotor
Servomotor can be installed either horizontally or vertically. However, if the servomotor is installed incorrectly, the
service life of the servomotor will be shortened or unexpected problems may occur.
Please observe the installation instructions described below to install the servomotor correctly.
Before installation:
Anticorrosive paint is coated on the edge of the servomotor shaft. Clean off the anticorrosive paint thoroughly using
a cloth moistened with thinner.
Avoid getting thinner on other parts of the servomotor when cleaning the shaft.
2.1.1 Storage
When the servomotor is not being used, store it in an area with a temperature between -25
℃
and 60
℃
with the power
cable disconnected.
2.1.2 Installation Sites
The servomotor is designed for indoor use. Install the servomotor in an environment which meets the following
conditions.
z
Free from corrosive and explosive gases.
z
Well-ventilated and free from dust and moisture.
z
Ambient temperature from 0 to 40
℃
.
z
Relative humidity from 26% to 80%( non-condensing).
z
Facilitates inspection and cleaning.
Summary of Contents for pronet series
