Estun pronet series, User Manual

Page: 94 / 193

ProNet Series AC Servo User's Manual
- 92 -
4.6 Operating Using Position Control
Set the following parameters for position control using pulse trains.
Parameter Meaning
Pn005 H
.□□
1
□
Control mode selection
：
position control (pulse train reference)
A block diagram for position control is shown as below.
Differential
Feed forward
B
A
Feed forward
filter time
constant
Offset
Positioning
complete
Current loop Speed loop
K
P Error counter
Smoothing
×1
×2
×4
dividing
×4
B
A
Servodrive(in position control)
Pn112 Pn201
Pn202
Pn113
Pn111
Pn500
Pn004.2
Pn204
Pn201
Pn202
Pn200
Reference pulse
PG signal output
Pn104
M
PG
Servomotor
Encoder
-
+
+
+
+
4.6.1 Basic Setting in Position Control
(1)Setting a reference pulse sign
Type Signal Name Connector Pin Number Name
Input
PULS CN1-30 Reference pulse input
/PULS CN1-31 Reference pulse input
SIGN CN1-32 Reference sign input
/SIGN CN1-33 Reference sign input
(2)Setting reference input filter for open collector signal
Pn006 0 □□□ when pulse is difference input, servo receiving pulse frequency ≤ 4M
1
□□□
when pulse is difference input, servo receiving pulse frequency ≤ 650K
2 □□□ when pulse is difference input, servo receiving pulse frequency ≤ 150K