Estun pronet series, User Manual

Page: 116 / 193

ProNet Series AC Servo User's Manual
- 114 -
(3)External Speed Limit Function
Type Signal Name Connector Pin Number Name
Input
V-REF+ CN1-1
External Speed Limit Input
V-REF- CN1-2
·
Inputs an analog voltage reference as the servomotor speed limit value during torque control.
·
The smaller value is enabled, the speed limit input from V-REF or the Pn406 (speed limit during torque control) when
Pn005=H.
□□1□.
·
The setting in Pn300 determines the voltage level to be input as the limit value. Polarity has no effect.
Pn300
Speed Reference Input Gain
Setting Range Setting Unit Factory Setting Setting Validation
0~3000 rpm/v 150 Immediately
· Set the voltage level for the speed that is to be externally limited during torque control.
4.8 Operating Using Speed Control with an Internally Set Speed
The function of internally set speed selection allows speed control operation by externally selecting an input signal from
among seven servomotor speed setting made in advance with parameters in the servo drive. The speed control
operations within the three settings are valid. There is no need for an external speed or pulse generator.
Position
Torque Speed