Epson EB-L25000U, User Manual

Page: 128 / 231

Submenu Function
HDBaseT
Control Communications (This cannot be set when Extron
XTP is set to On .) When set to On , Ethernet
communication, serial communication, and the wired
remote control through the HDBaseT Transmitter connected
to the HDBaseT port are all enabled.
Extron XTP : Set to On when you connect the Extron XTP
transmitter or switcher to the HDBaseT port. See the
following Extron Web site for more details on the XTP
system.
http://www.extron.com/
a
•
When Control Communications or Ex‐
tron XTP is set to On , Standby Mode is
automatically set to Communication On .
•
When Control Communications or Ex‐
tron XTP is On , the projector's LAN
port, RS-232 port, and Remote port are
disabled.
•
When Extron XTP is set to On , the fan
may rotate in standby mode but this is
not abnormal.
Color Calibra-
tion
Start Auto Adjustment : Automatically adjusts the color
tone for the whole screen.
s
"Color Calibration" p.182
Undo : Undoes the auto adjustment.
Redo : Redoes the auto adjustment.
Color Uniformity : Adjusts the color tone balance for the
whole screen.
s
"Color Uniformity" p.184
Reset : You can reset all adjustment values for Color
Calibration to their default values.
Submenu Function
Multi-Projection
Make settings when projecting from multiple projectors.
s
"Multi-Projection Function" p.83
Projector ID : Set the ID from 1 to 30. Off indicates that no
ID is set.
s
"ID Settings" p.37
Projector Grouping : When using multiple projectors to
project one image, select the projectors being used.
Tiling : Set the number of split screens and positions of each
projected image.
s
"Tiling" p.84
Geometry Correction : Corrects distortion in the projected
image.
s
"Correcting Distortion in the Projected Image" p.55
Edge Blending : Corrects a border between multiple images
to create a seamless screen.
s
"Edge Blending" p.87
Black Level : Adjusts the differences in brightness and tone
for areas where images overlap and areas where the images
do not overlap.
s
"Black Level" p.88
Scale : When using multiple projectors to project one image,
adjust the range of the image displayed by each projector.
s
"Displaying a Scaled Image" p.95
Screen Matching : Adjusts the tint and brightness for each
projector.
s
"Screen Matching" p.92
Reset : You can reset all adjustment values for the Multi-
Projection menu to their default settings.
Schedule Set-
tings
You can set the projector's schedule so that it performs a
specific operation at a pre-scheduled time.
s
"Scheduling Function" p.105
Language
You can set the language for messages and menus.
List of Functions
128