a
•
The projector can be installed at any angle. There is no vertical or
horizontal limit to how the projector can be installed.
•
We recommend setting the focus, zoom, and lens shift at least 20
minutes after you start the projection, because images are not stable
right after turning on the projector.
•
When using a projector with an air filter on the ceiling side, the air
filter will become clogged frequently. Clean the air filter regularly.
s
•
You can install the projector in a portrait orientation by attaching
the carrying handles to the top and bottom of the projector.
•
You can remove the feet from the projector and attach them to the
carrying handle.
Warning and Cautions on Usage
Warning
•
Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents is covered, the internal temperature could rise and cause a fire.
•
Do not look into the lens while projecting. The powerful light emitted could
cause damage to eyesight. Take particular care when there are children
present. When turning on the projector at a distance using the remote
control, make sure there is no one looking into the lens.
•
During projection, do not block the light from the projector with the lens
cover (removable) or a book and so on.
If the light from the projector is blocked, the area on which the light shines
becomes hot which could cause it to melt, burn, or start a fire. Also, the lens
may get hot due to the reflected light which could cause the projector to
malfunction. To stop projection, use the Shutter function, or turn off the
projector.
•
Do not open the projector's case. Never disassemble or remodel the projector.
There are high-voltage components inside the projector that could cause fire,
electric shock, or an accident.
•
If an error occurs, turn off the power immediately, disconnect the power cord
from the electrical outlet, and contact your local dealer or the nearest address
provided in the Epson Projector Contact List. If you continue using the
projector as it is, it could cause an electric shock, fire, or even damage to
eyesight.
s
Caution
Do not place objects that may become warped or otherwise affected by heat
near the air exhaust vent and do not put your face or hands near the vent
while projection is in progress.
Safety Warning and Cautions
5
Summary of Contents for EB-L25000U
