Epson EB-L25000U, User Manual

Page: 3 / 231

Make sure you read the following before you use the projector.
s
Safety Instructions
Warning and Cautions on Installation
Warning
•
Do not use or install the projector where it may be subject to water or rain,
or high humidity, such as outdoors, in a bathroom, or shower room, and so
on. Otherwise, it could cause a fire or electric shock.
•
Note the following points when installing on a ceiling (ceiling mount) or in a
high location. If installation work is not carried out correctly, the projector
could fall down. This may result in injury or accidents.
- Since special techniques are required to install the projector on a ceiling
and to handle the ceiling mount, make sure you contact a professional.
- Secure the mount with bolts using the handle securing section (6
points) on the top or base of the projector.
- To prevent the projector from falling, thread sufficiently strong wire
rope and so on through the ceiling mount and secure to the ceiling.
•
Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents is covered, the internal temperature could rise and cause a fire.
For the installation requirements for air intake vent and air exhaust vent, see
the
Transport and Installation Handbook supplied.
•
Do not place flammable objects in front of the lens. If you set the schedule to
turn on the projector automatically, any flammable objects placed in front of
the lens could cause a fire.
•
Do not tie the power cord and other connection cables together. Otherwise, it
could cause a fire.
•
Only use the specified power-supply voltage. Otherwise, it could cause a fire
or electric shock.
Warning
•
Be careful when handling the power cord. Otherwise, it could cause a fire or
electric shock. Note the following when handling the power cord.
- Do not plug multiple power cords in a single electric outlet.
- Do not plug in the power cord if there are any foreign substances, such
as dust, stuck to it.
- Make sure you insert the power cord all the way in.
- Do not plug in or unplug the power cord with wet hands.
- Do not pull the cord when unplugging the power cord. Make sure you
hold it by the plug.
•
Do not use a damaged power cord. Otherwise, it could cause a fire or electric
shock. Note the following when handling the power cord.
- Do not alter the power cord.
- Do not place any heavy objects on the power cord.
- Do not bend, twist, or pull the power cord forcibly.
- Do not layout the power cord near a heating device.
Caution
Do not place the projector on an unstable surface, such as on an unstable table
or tilted surface. Install the projector appropriately to prevent the projector
from falling.
Otherwise it may cause an injury.
Safety Warning and Cautions
3