Epson EB-L25000U, User Manual

Page: 104 / 231

Function Explanation
Load Memory
Loads the saved memory. When you select a
memory and press the [
] button, the settings
applied to the current image are replaced with the
settings from the memory.
Save Memory
Registers current settings in the memory. When
you select a memory name and press the [
]
button, the settings are saved.
Erase Memory
Erases the registered memory. When you select a
memory name and press the [
] button, a
message is displayed. Select Yes , and then press the
[ ] button to erase the selected memory.
Rename Memory
Changes the memory name. Select the memory
name you want to change, and then press the [
]
button. Enter the memory name using the soft
keyboard.
s
"Soft keyboard operations" p.130
When you have finished, move the cursor over
Finish , and then press the [ ] button.
Function Explanation
Reset Memory
Resets the name and settings of a saved memory.
To reset all memories saved in
Memory , Lens
Position , and Geometry Correction , use Reset All
Memories .
s
Reset - Reset All Memories p.137
a
If the mark on the left of the memory name is turned blue, it
means the memory has already been registered. When you
select a registered memory, a message is displayed asking you to
confirm that you want to overwrite the memory. If you select
Yes
, the previous settings are deleted and the current settings
are registered.
Memory Function
104