Energetics E-103, Manual

Page: 28 / 212

User Manual
>> ser
vic
e
>> 028
Service
Troubleshooting
Error message
ERR: . The .computer .receives .no .signal .during .the .Recovery .Program .
or
. the .computer .receives .no .signal .during .the .BMI-Body .Fat .
. Measurement .test .mode .
E1: . The .computer .receives .no .signal .from .the .motor .or .the .signal .is .
.
interrupted .
ERR2: . There .is .no .connection .between .the .power .board .and .the .computer .
.
or .the .power .board .is .defective .
Solution: .see . .“The .computer .display .is .not .working“ .
The computer display is not working
• .The .computer .might .not .be .getting .power . .Check .all .connections .and .
cables . .
• .If .all .connections .are .in .order .and .you .still .have .no .read .out .on .the .display .
please .contact .your .local .ENERGETICS-dealer .
Heart rate (PULSE) shows no or incorrect read out
• .Check .if .your .palms .have .proper .contact .with .the .sensors . .Both .palms .have .
to .be .in .contact .with .the .sensors .simultaneously . .The .display .may .be .on .a .
slight .delay .
• .Check .all .cable .connections .
• .Try .moistening .your .hands .if .they .are .dry .
The computer has shut down
In .rare .cases .the .computer .might .shut .down, .mainly .because .of .sudden .
changes .in .the .electrical .current .or .static .discharge . .Normally .the .E-103 .
restarts .on .its .own .
Should .this .not .occur .restart .the .computer .by .pulling .the .power .plug, .wait .a .
few .seconds .then .reinsert .it . .
Care
Take .care .that .to .avoid .any .moisture .penetration . .Clean .the .computer .with .a .
lightly .dampened .cloth . .Do .not .use .abrasive .cleaning .solutions . .
Maintenance
There .is .no .need .for .special .maintenance . .Regularly .check .that .all .bolts .and .
connections .have .a .tight .fit . .Exchange .any .defective .parts .immediately . .For .
assistance .contact .your .local .ENERGETICS-dealer .