Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 121 / 234

D 81
D
PL5
00/
20S.
G
B 81-
1
16 -
04.
07
Auxiliary starting (electrical starting
aid)
The engine can be started with the help
of an external power source if the bat-
teries are empty and the starter no long-
er turns.
Suitable power sources are:
- Other vehicles with a 24 V system
- Additional 24 V battery
- starting aid, 20V/100A.
$
Standard chargers or quick chargers
cannot be used for external starting.
To externally start the engine:
- Connect power source to batteries lo-
cated behind flap at front of machine
using suitable cables.
$
Observe the polarity! Always connect
the negative cable last and disconnect it
first!
- Insert ignition key (5) in ignition lock in
setting „P“.
- Switch on ignition (Pos. 1).
- Turn ignition key in Pos. 2 to start the
diesel engine.
- Once the diesel engine fires, let go of the ignition key.
- The ignition key automatically jumps back into Pos. 1.
If the engine fails to start despite this starting aid: track down the cause, then proceed
in accordance with the engine's Operating Instructions if necessary.
When the engine is running:
- disconnect external source of power.
When using starting aid spray, ensure fuel injection system is properly ventilated, as
defined in the engine's Operating Instructions.
Panel3_V2.bmp,Iso600.wmf
5