Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 128 / 234

D 88
D
PL5
00/
20S.
G
B 88-
1
16 -
04.
07
Milling (preparation) :
- Drive the machine to the milling location and lower manually as far as possible (mill-
ing drum does not make contact with ground at this stage).
Engage the following functions on the main operating panel:
The automatic function for water spraying system and upper conveyor is engaged as
soon as the drive lever moves out of its central position and is disengaged automati-
cally as soon as the machine is stopped.
Item Switch Position
28 Traction drive fast/slow Working gear (tortoise mode)
27 Preselector for travel drive Approx. average power
31 Milling drum ON / OFF Milling drum transmission ON
33 Water pump ON / OFF Pos „Auto“ or „1“
26 Increase the engine speed „max“
36 Raising and lowering speed Lower switch position (slow)
35
(
&
)
Selector switch for front board Floating position
34 Selector switch for moldboard Floating position
32 Upper conveyor mode Pos „Auto“ or „1“
71
70
Panel2_500_1000.wmf/Panel4_V2.bmp
28
27
26
36 32 35 31 34 33