Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 36 / 234

C 4
C PL5
00/
20S.
G
B
4-
8 -
04.
07
4 Normal on-road travel
The machine is intended for operation and use within self-contained construction
sites.
If the loading or discharge section of the machine is outside the enclosed construction
site, or if the machine needs to be driven from one section of a site to another, a sec-
ond person must accompany the machine for that journey. All safety measures (cor-
doning off) required for this should be implemented.
If a machine needs to be parked in an area of heavy traffic, it must be cordoned off in
accordance with specifications and the machine must also be chocked to prevent it
from rolling away or tipping over.
If machine components protrude into another lane of traffic during milling or manoeu-
vring, this should be briefly cordoned off until the hazard has passed.
If necessary, the machine should always be used on the nearside, away from oncom-
ing traffic.
For relocation or during journeys required over a long distance (distances > 1 km),
the machine should be transported on its transporter for technical and safety reasons.