Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 18 / 234

B 6
B
PL
500/
20S.
G
B 6-
20 -
04.
07
Headlights, flashers,
rotary beacons
Lights for illuminating different operating
areas and for indicating danger areas
and/or dangerous situations are located
at various machine positions.
The machine has two contacts which
can be fitted to the headlights or to the
rotary beacons.
The headlights or rotary beacons are en-
gaged using their respective switches on
the control panel.
The function of the headlights and warn-
ing lamps should be checked on a daily
basis before starting work.
The headlights are easy to remove and
should therefore, as a safety precaution,
be removed at the end of work and
stored in a safe location.
$
Headlight contacts which are not used
should be protected using rubber caps.
Retaining hook, moldboard
- Retaining tab on moldboard and re-
taining hook on machine frame en-
gage with one another in raised
position.
Secures the moldboard to prevent it
from being lowered accidentally.
Panel2_500_20S_v2.bmp/Iso500_compl_short.wmf
Scraper_safety_pl600