Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 78 / 234

D 38
D
PL5
00/
20S.
G
B 38-
1
16 -
04.
07
Battery’s main switch
The battery’s main switch (1) is located
under the right-hand flap on the engine
compartment. It disconnects the electri-
cal circuit from its earth/ground.
The main fuses (2) are located beside
the master switch.
- To deactivate the master switch, turn
to the left and remove.
Do not lose the removed master switch
because otherwise you will not be able
to start the machine.
For the specifications governing all fus-
es, refer to Chapter „Maintenance“.
Always switch off the master switch after finishing work! (otherwise battery might dis-
charge as a result of creep currents)
Batteries
Both batteries on the 24 volt system are
located behind a hinged panel at the
front of the machine.
For the specifications, refer to Chapter
B „Technical data“.
For maintenance, refer to Chapter
„Maintenance“.
$
Auxiliary starting - only in accordance
with Instructions
(see Section „Starting Machine, auxilia-
ry starting (starting aid)“.
Lufi_Pl600.tif
1
2
Iso600.wmf