Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 209 / 234

F 49
F PL
500/
20S.
G
B 49
-74
- 04.
07
3.7 Power supply
Batteries
$
Check the charge level of the batteries
every 250 operating hours and at least
every 3 months.
The two batteries are located behind the
flap at the front of the machine.
The batteries are factory-filled with the
correct quantity of acid. The fluid level
should come up to the top mark. If re-
quired, top up the battery, but only use
distilled water to do so!
The battery terminal clips must be free of
corrosion (oxide) and protected with a
special grade of terminal grease.
The gas in the battery is explosive. Avoid naked lights and sparks.
$
When removing the batteries, always first remove the negative terminal, ensuring that
the battery terminals cannot be short circuited.
The battery contains corrosive and toxic sulphuric acid. Wear protective goggles and
avoid all contact with the skin!
Batterie_PL500.wmf