Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 197 / 234

F 37
F PL
500/
20S.
G
B 37
-74
- 04.
07
Oil change
$
Always perform oil changes with the oil
at operating temperature, immediately
after the gearbox comes to a standstill.
This ensures that suspended particles of
solid matter do not have time to settle
and form sediment.
Wear protective clothing when draining
hot oil. Health hazard caused by contact
with the skin.
- Park machine in horizontal position
- Remove the inspection screw (2).
- Remove the oil drainage screw (1) and collect draining oil.
- After all the oil has drained, properly screw the drainage screw (1) back in.
- Top up with fresh oil through the opened bore in the level checking screw until a
small amount of oil emerges from the bore.
- Properly reinstall the inspection screw (2).
Collect used oil in a suitable container and dispose of properly.
$
When filling with oil, ensure high standards of cleanliness are observed.
Drumgear500.eps
1
2