Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 126 / 234

D 86
D
PL5
00/
20S.
G
B 86-
1
16 -
04.
07
Milling on edge of road surface or on
offsets
$
Pay close attention to load-bearing ca-
pacity of right-hand track.
$
Raise planer sufficiently!
The milling drum must have more
ground clearance than the height of the
offset.
$
Always keep planer level when engag-
ing it in the milling position!
$
For milling operations, lower the ma-
chine evenly down to the desired milling
depth.
Depth setting:
- left - desired milling depth
- right - desired milling depth + height of offset or in such a way that the planer is al-
ways in a horizontal position.
Milling at the curb
(with deployed chassis leg)
Advantages:
- high milling precision
- exact milling surface
- direct milling against kerb possible
Disadvantages:
- Under certain circumstances, it may
not be possible to achieve the re-
quired milling depth
PL600_Back5.cdr
PL600_Back6.cdr