Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 146 / 234

D 106
D
PL5
00/
20S.
G
B 106
-1
16 -
04.
07
Error codes
Error
code
and
warn-
ing
lamp
PID(P)
SID(S)
FMI
SPN(S)
FMI Cause Effect
111*
YEL-
LOW
S254
12 629
12 Internal hardware error in electronic
control unit. Possibly no impact or engine possibly
runs roughly or fails to start.
115*
YEL-
LOW
P190
2 190
2
No engine speed or position signal
detected on pin 17 of engine wiring
harness
Engine power restricted.
Possibly white smoke.
122
YEL-
LOW
P102
3 102
3
Short circuit detected on pin 45 for
charge pressure sensor signal on en-
gine wiring harness.
Engine is restricted to zero charge fill-
ing.
123
YEL-
LOW
P102
4 102
4
Undervoltage detected on pin 45 for
charge pressure sensor signal on en-
gine wiring harness.
Engine is restricted to zero charge fill-
ing.
131
YEL-
LOW
P091
3 091
3
Short circuit detected on pin 30 for
speed adjustment on OEM wiring
harness
Engine is running at idle speed when-
ever the idle speed switch indicates
„idle speed on“, and runs up to a preset
speed at which point the idle speed
switch signals „idle speed off“.
132
YEL-
LOW
P091
4 091
4
Undervoltage detected on pin 30 for
speed adjustment on OEM wiring
harness
Engine is running at idle speed when-
ever the idle speed switch indicates
„idle speed on“, and runs up to a preset
speed at which point the idle speed
switch signals „idle speed off“.
133
YEL-
LOW
P029
3 029
3
Short circuit detected on pin 9 result-
ing from removal of speed adjust-
ment on the OEM wiring harness.
Engine fails to respond to removed
speed adjustment
134
YEL-
LOW
P029
4 029
4
Undervoltage detected on pin 9 re-
sulting from removal of speed adjust-
ment on the OEM wiring harness.
Engine fails to respond to removed
speed adjustment
135
YEL-
LOW
P100
3 100
3
Short circuit detected on pin 33 for oil
pressure signal on engine wiring har-
ness.
Specified value for oil pressure. No en-
gine protection for oil pressure
141
YEL-
LOW
P100
4 100
4
Undervoltage detected on pin 33 for
oil pressure signal on engine wiring
harness.
Specified value for oil pressure. No en-
gine protection for oil pressure
143
YEL-
LOW
P100
1 100
1
The oil pressure signal indicates that
the oil pressure is below the mini-
mum limit value for engine protection
purposes.
Restriction of power and possibly shut-
down of engine if the engine protection
shutoff function is enabled.
144
YEL-
LOW
P110
3 110
3
Short circuit detected on pin 23 for
the coolant temperature signal on the
engine wiring harness. Specified value for coolant tempera-
ture. No engine protection for coolant
temperature
145
YEL-
LOW
P110
4 110
4
Undervoltage detected on pin 23 for
the coolant temperature signal on the
engine wiring harness. Specified value for coolant tempera-
ture. No engine protection for coolant
temperature
146
YEL-
LOW
P110
0 110
0
The coolant temperature signal indi-
cates that coolant temperature has
risen above the engine protection
limit value.
Restriction of power and possibly shut-
down of engine if the engine protection
shutoff function is enabled.