Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 210 / 234

F 50
F PL
500/
20S.
G
B 50
-74
- 04.
07
3.8 Other
Emergency-stop button
For your personal safety, the safety of other persons and of the machine, you should
check the function of the emergency-stop button on a daily basis.
$
Defective emergency-stop buttons must be replaced immediately.
The emergency-stop button is located on the control panel.
$
The engine, drives and steering system are shut down when the emergency-stop but-
ton is pressed. Any action which may then be required, e.g. steering, is no longer pos-
sible at this time! Danger of accidents!
Limit switch on upper conveyor
The safety cut-out for height restriction
must be checked for correct operation
on a daily basis.
- The height adjuster must be disabled
automatically as soon as the limit
switch is tripped.
The limit switch is located on the left-
hand side of the frame on the upper con-
veyor beside the suspension
The limit switch is completely redundant
on versions with a short upper conveyor!
Limit_PL600.wmf