Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 217 / 234

F 57
F PL
500/
20S.
G
B 57
-74
- 04.
07
6 Lubrication agents and fuel substances
Use only the lubricants listed below or comparable qualities of well-known brands.
Only use containers which are clean on inside and outside for filling oil or fuel.
Comply with specified filling volumes!
$
Incorrect oil or lubricant levels increase the wear and cause the paver finisher to fail.
Grease
BP
multi-
grade
grease L2
ESSO
multi-
grade
grease
FINA
Marson
L2
Mobilux 2
Mobiplex
47
Aral
Aralub
MPU
SHELL
EP 2
Retinax A
Engine oil
Refer to Operating instructions for the engine.
Shell Rimula 10 W 40 is the factory-filled grade.
Hydraulic
oil
Refer to Section 7.1
Shell Tellus Oil 46 is the factory-filled grade.
Transmis-
sion oil
220
(planetary
gear,
milling drum
gear box)
Optimol Optigear is the factory-filled grade of gear oil (planetary gear, drive wheels,
milling drum gear box)
Transmis-
sion fluid
90
(angle
drive)
The unit is factory-filled with Shell Spirax MB90 (angle drive)
Dist.
water
Diesel
fuel
Cooling
fluid
Cooling fluid (anti-freeze with corrosion inhibitor)
Shell long-life 40 fluid is factory-filled (engine)