Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 82 / 234

D 42
D
PL5
00/
20S.
G
B 42-
1
16 -
04.
07
Retaining hook, moldboard
For safety reasons, during maintenance
work on the milling drum or on the milling
box, the moldboard is secured in its up-
per position by means of a retaining
hook.
- Swivel out retaining hook (1) using le-
ver (2)
- Extend the moldboard until the retain-
ing tab on the flap (3) locates in the re-
taining hook (1).
- Swivel retaining hook (1) into retaining
position using lever (2).
To lower the moldboard, first raise the
flap slightly until the retaining hook can
be unlocked.
When working on the machine with
raised moldboard (e.g. when replacing
bit), always secure the flap using the re-
taining hook!
Sicherung_PL500_V3.wmf/Scraper_safety_pl600
3
1
2