Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 75 / 234

D 35
D
PL5
00/
20S.
G
B 35-
1
16 -
04.
07
Driver’s seat
The driver’s seat on the operator’s con-
trol station should be adjusted to suit the
needs of the driver/operator before start-
ing work.
Depending on the version, the following
adjustments can be made to these seat
settings:
Standard seat:
- To adjust the seat for the weight of the
driver, turn handle (1) on top of back-
rest support until the approximate
weight of the driver is displayed on the
scale (2).
- For height adjuster of the backrest,
unfasten both handles (3) on the back-
rest, slide the backrest upwards or
downwards then tighten the handles
again to secure backrest in this posi-
tion.
Luxury seat (
&
):
- To set the correct seat hardness, fold
the crank on the handwheel (4) for-
wards and rotate until the approximate
weight of the driver appears on the
display (5).
- Pull up the grip recess (6) on the back
of the seat and set the height of the
backrest.
The armrests (
&
) can also be swivelled
upwards.
Always ensure that the driver’s seat is
properly secured.
Seat2.tif/Sitz_Lux.bmp/Sitz_Lux2.bmp
4
5
6
1
2
3
(
&
)