Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 11 / 234

A 1
A
PL
500/
20S.
G
B 1-
2 -
04.
07
A Correct use and application
The Dynapac „Guideline for the intended and correct usage of cold planers“ falls with-
in the scope of supply of this machine. The guidelines are part of the present operat-
ing instructions and must always be heeded. National regulations are fully applicable.
The machine described in these Operating Instructions is a cold planer which can be
used as follows in enclosed building sites on roads:
- for partial removal of asphalt, asphalt-cement and layers of concrete
- to remove distortions in the form of track grooves, lateral bulges, lateral warps,
- to recreate a proper surface,
- to perform roughing and demarcation work,
- for use in preparatory work in pipeline and cable-laying work.
For this, the underlying base layer must be robust enough to withstand movement of
the cold planer.
The transportation of outsiders is expressly forbidden, as is using the cold planer as
a traction mechanism, winch or lifting device.
The intended usage also includes compliance with the operating, transport, mainte-
nance and repair conditions specified in the Operating Instructions.
The machine is not designed for any type of usage not described in the intended us-
age section. The manufacturer is not liable for such instances of use. The operator
alone bears all risks for such usage. When in doubt, contact the manufacturer.
Duties of the user: An operator, as defined in these Operating Instructions, is any
natural or judicial person who uses the cold planer himself or on whose behalf it is
used. In special circumstances (e.g. leasing, rental), the operator is that person who
is to observe the specified operating obligations in accordance with the contractual
agreements made between the owner and user of the cold planer.
The operator must ensure that the cold planer is only ever used for its intended pur-
pose and that risks of all kind to the health and safety at work of the operator or third
parties are prevented. In addition to this, it must be ensured that the relevant accident
prevention regulations and other safety-related provisions as well as the operating,
servicing and maintenance guidelines are observed. The user must also ensure that
all persons operating the paver finisher have read and understood the present oper-
ating instructions.