Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 196 / 234

F 36
F PL
500/
20S.
G
B 36
-74
- 04.
07
Milling drum gear box
Oil level check
To check the oil level and while filling
with oil, the machine must be in a hori-
zontal position.
- Unscrew and remove the filler and lev-
el checking screw (1).
The oil level should reach the lower edge
of the hole for the locking screw.
- Top up with oil through the opened
bore until a small amount of oil starts
to escape.
- Refit the filling and inspection screw again properly.
$
When filling with oil, ensure high standards of cleanliness are observed.
Drumgear500.eps
1