Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 69 / 234

D 29
D
PL5
00/
20S.
G
B 29-
1
16 -
04.
07
Item Designation Brief description
74
Machine raising/
lowering, right-
hand side
The hydraulic cylinder of the right-hand chassis leg is
retracted and/or extended by pressing the switch.
- Operated upwards: Raising vehicle
- Operated downwards: Lower the vehicle
In order to raise or lower the machine evenly,
the switch can be operated simultaneously with
switch (73).
The engine cannot be started if this function is
engaged!
75
Raising/lowering
sliding shoe (
&
)
The sliding shoe is raised or lowered to the upper or
lower limit position whenever the switch is being
pressed in the relevant direction.
Danger resulting from raised loads. Do not en-
ter the danger area.
Danger resulting from escaping material!
The load pressure setting can be adjusted and
can be read off on the corresponding pressure
gauge.
76
Raising / lower-
ing moldboard
(moldboard)
The moldboard is raised or lowered to the upper or
lower limit position whenever the switch is being
pressed in the relevant direction.
Danger resulting from raised loads. Do not en-
ter the danger area.
Danger from rotating milling drum!
The relief pressure setting can be adjusted and
can be read off on the corresponding pressure
gauge.