Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 174 / 234

F 14
F PL
500/
20S.
G
B 14
-74
- 04.
07
Air cleaner
The air cleaner is located behind the
right-hand flap of the engine compart-
ment. This fl ap is opened using a
square-section wrench.
$
Drain the dust collector (1) every 50
hours.
To gain access to the filter cartridge, the
connections (2) on the housing and the
sealing cover must be removed from the
filter housing.
Replace filter cartridge after removal or
clean the old one using compressed air.
Follow advice in the Operating instructions for the engine!
Radiator
$
Check the coolant level daily before
starting work.
Replace the coolant at least once a year.
The expansion tank with the filler aper-
ture is located under a flap on the top
surface of the water tank.
System is under pressure when hot.
Therefore a risk of scalding when
opened!
In addition, on a daily basis, check the
cooling ribs for dirt and, where applica-
ble, clean using suitable agents.
Collect used coolant in a suitable container and send for disposal.
Follow advice in the Operating instructions for the engine!
Lufi_Pl500.eps
1
2
Wasse2r_PL500.eps