Dynapac PL 500/20 S, Operation & Maintenance Manual

Page: 80 / 234

D 40
D
PL5
00/
20S.
G
B 40-
1
16 -
04.
07
Swivel-mounted chassis leg
For certain working requirements, e.g. to
ensure precision edge milling, the right-
hand chassis leg can be swivelled out so
far that it meets the outer edge of the ve-
hicle.
- Carefully and uniformly lower machine
onto milling drum and fully retract the
left chassis leg.
- Remove pin (1) and swivel the wheel
in by hand.
- With the wheel in retracted position,
secure by placing pin in bore (2).
$
If the chassis leg is retracted, the direc-
tion of rotation of the wheel must be reversed!
The changeover valve in the hydraulic
circuit is located in the wheel bracket on
the swivel-mounted chassis leg.
Depending on the chassis leg’s position,
the hydraulic circuit of the drive may
have to be changed over to achieve the
same direction of rotation.
- Fit the socket head in the accessories
to the square-head pin (3) and alter
the direction of rotation by turning it ei-
ther left (caw) or right (cw).
Schwenk1_Pl500.eps
1
2
Schwenk2.tif
3