DTM Print CX86e, User Manual

Page: 71 / 214

71
Item Setting Description
MENU OPERATION
SETUP
UP/DOWN
KEY
NORMAL
TYPE
OLD TYPE
Sets the operation performed when «
∧
» button or «
∨
» button is pressed when
selecting a category/item/value in a menu.
NORMAL TYPE: When «
∧ » button is pressed, the machine returns to the pre-
vious item (up in the displayed list). When « ∨ » button is pressed, the machine
moves to the next item (down in the displayed list).
OLD TYPE: When «
∧
» button is pressed, the machine moves to the next item
(down in the displayed list). When «
∨
» button is pressed, the machine returns to
the previous item (up in the displayed list).
A confirmation message is displayed when this setting is changed.
When [YES] is selected, the setting is changed and the machine restarts.
POWER RETURN ALWAYS
ON
ALWAYS
OFF
LAST STATE
Sets the power supply method when the machine recovers from a power fail-
ure.
ALWAYS ON: The machine restarts when the power supply resumes.
ALWAYS OFF: The power needs to be turned on manually.
LAST STATE: The state before the power failure is resumed.
SENSOR RESET EXECUTE Resets the calibration values of the paper sensors.
The paper sensor calibration values calibrated by executing [MENUS] > [SEN-
SOR CONFIG] > [SENSOR CALIBRATION] are reset.
*Execute this menu operation if the "OPEN TOP COVER/380:PAPER JAM" error
occurs after executing [SENSOR CALIBRATION] and the error is not cleared
when the machine is restarted. If paper sensor adjustment is required after
executing this menu operation, execute [SENSOR CALIBRATION] again.