DTM Print CX86e, User Manual

Page: 160 / 214

160
The Area Around the Image Is Dirty
Cause Remedy Reference
The image is not reduced to a ratio
that matches the paper size.
Reduce the image to a ratio that
matches the paper size.
Keeping the Page Layout when
Resizing a Document
The Colors of the Image Are Unexpected
?
Cause Remedy Reference
Toner is low. If [REPLACE TONER] or [TONER EMPTY] is displayed,
replace the toner cartridge.
Replacing the Toner Cartridge
The toner adjustment was changed. The toner adjustment was changed. Perform color
matching from the printer driver.
Changing the Color Settings
The color balance has not been
adjusted.
Select [CALIBRATION] in the menu, and execute
[ADJUST DENSITY], or [CYAN TUNING], [MAGENTA
TUNING], or [YELLOW TUNING].
Correcting the Color Density
Adjusting the Color Balance
(Density)
Color shift has not been adjusted. Open and close the top cover. Or, execute [CALIBRA-
TION] > [ADJUST REGISTRATION] on the menu.
Names of Components
Menu LIst
[Replace mono barcode with cyan]
is enabled.
From the [Setup] tab, go to [Barcode correction] >
[Options] and deselect [Replace mono barcode with
cyan].
Correcting Barcodes for Printing
Bar Width Adjustment is enabled. Disable Bar Width Adjustment on the [Setup] tab
> [Barcode Correction] > [Options] of the printer
driver.
Correcting Barcodes for Printing
The Black of CMY 100% Is Light