DTM Print CX86e User Manual Download Page 29

Page: 29 / 214

Attach the Cover-Cable-PSNT.

Attach the Cap-Cover-PSNT (x 2).

Enable the Presenter Unit on the operation panel.

Turn on the machine.

For information on turning on the machine, refer to “Turning On the Machine”.

Confirm that [READY TO PRINT] is displayed on the machine.

Press

∧

button or

∨

button several times to display [ADMIN SETUP].

Press OK button.

When [ENTER PASSWORD] is displayed, enter the password.

The default password is “999999.”

When the password has been entered, press O» button.

Press

∧

button or

∨

button several times to display [OTHERS SETUP].

Press OK button.

Press

∧

button or

∨

button several times to display [PRESENTER UNIT].

Press OK button.

With the setting flashing, press

∧

button or

∨

button to display [ENABLE], and press OK button.

The machine restarts and returns to the [READY TO PRINT] standby status.

For information on printing, refer to “Printing Using the Presenter Unit”.

Summary of Contents for CX86e






















































































































































































































Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands

DTM Print CX86e, User Manual

Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands