DTM Print CX86e, User Manual, Page: 87 / 214

87
The roll paper has holes in it. The roll paper is torn.
—
When cutting the leading edge of the paper with scissors, cut the paper vertically to the feed direction, so that
it can be fed into the machine.
—
Be careful not to cut through any barcodes printed on the roll paper.
—
You cannot use the roll paper that its edge is dented.
Set the upper and lower paper sensors in the appropriate positions.
X
For details, refer to “Setting the Paper Sensors”.
Insert your finger below the gray lever on the left of the machine rear, and lift it up to open the feeder cover.