DTM Print CX86e, User Manual

Page: 70 / 214

70
WIRELESS (AP MODE) SETTING
Settings related to wireless LAN.
Item Setting Description
WIRELESS(AP MODE) ENABLE
DISABLE Sets whether wireless (AP mode) is enabled or disabled.
AUTOMATIC SETUP (PUSHBUT-
TON)
When YES is selected, automatic connection via a push button is started.
If the connection fails, the machine returns to the previous screen. If it
succeeds,
SUCCEEDED PRESS OK
is displayed.
MANUAL SETUP SSID Displays the SSID.
PASSWORD Displays the password.
CONNECTION
SETTING
SSID Enter an SSID.
PASSWORD Enter the password.
IPV4 ADDRESS xxx.xxx.xxx.xxx Enter the IP address.
EXECUTE Starts connecting.
AP MODE USER SETTING ENABLE
DISABLE Sets whether to disclose the AP mode information to people other than the
administrator.
BOOT MENU
Perform the following operation to display the BOOT MENU.
1. If the machine is on, turn it off.
2. Turn the machine on while holding «OK» button on the operation panel. Hold «OK» button until [BOOT MENU] is
displayed on the screen.
3. When [BOOT MENU] is displayed, release your finger and press «OK» button again.
4. When the screen for entering the password is displayed, enter the password. The password is the same as that used
to enter the [ADMIN SETUP] menu for the administrator.
Item Setting Description
WIRELESS MODULE ENABLE
DISABLE Enables the wireless LAN board.
When set to ENABLE, the setting is retained even when the wireless LAN board
is removed.
MENU LOCKOUT ON
OFF Sets the menu lockout function.
ON: The menu is not displayed.
OFF: The menu is displayed.
PANEL LOCKOUT MODE1
MODE2
OFF Sets the panel lockout function.
MODE1: The «ONLINE», «OK», «CANCEL», «POWER SAVE», and «FEED/CUT» but-
tons can be used, but other buttons are disabled.
MODE2: The «ONLINE», «OK», «POWER SAVE», and «FEED/CUT»buttons can be
used, but other buttons are disabled.
OFF: All buttons are disabled.